Acorn Tiles
Tile Levelling Clips – 1.5mm & 2mm | Packs of 100 or 5,000
Tile Levelling Clips – 1.5mm & 2mm | Packs of 100 or 5,000
Couldn't load pickup availability
Achieve evenly spaced, level tiled surfaces with Acorn Tiles tile levelling clips. Designed to reduce lippage between adjoining tiles during installation, they help create a flatter and more consistent finish on suitable wall and floor tiling projects.
Choose between 1.5mm and 2mm clips to create your required grout joint. The clips are suitable for tiles between 3mm and 15mm thick and are designed for use with Acorn Tiles reusable levelling wedges.
Available in convenient packs of 100 or trade packs of 5,000.
Key features
• Helps reduce lippage between adjoining tiles
• Creates a consistent 1.5mm or 2mm grout joint
• Suitable for tiles between 3mm and 15mm thick
• Suitable for wall and floor tile installations
• Compatible with Acorn Tiles levelling wedges
• Available in packs of 100 or 5,000
• Ideal for professional tilers and DIY projects
How to use tile levelling clips
-
Apply the tile adhesive and position the first tile.
-
Insert the clip beneath the edge of the tile.
-
Position the adjoining tile against the clip.
-
Push a levelling wedge through the opening until both tiles are held level.
-
Allow the adhesive to cure fully.
-
Remove the clips by striking them along the direction of the grout joint.
-
Collect the wedges for reuse.
The clips are single-use components. Levelling wedges are sold separately and can normally be reused when undamaged.
Share
Frequently Asked Questions
What is the difference between 1.5mm and 2mm levelling clips?
The measurement determines the approximate grout-joint width created between the tiles. Choose the size that matches your preferred joint and installation requirements.
What tile thickness can I use?
The clips are suitable for tiles between 3mm and 15mm thick.
Can the clips be reused?
No. The clips are designed to break away after the adhesive has cured. The wedges can normally be collected and reused.
Do the clips replace tile spacers?
The clip base creates a consistent joint between adjoining tiles, so separate spacers are not normally required along those edges. Additional spacers may still be useful around corners, perimeters and complex layouts.
Can they be used on walls and floors?
Yes. They are suitable for compatible ceramic and porcelain tile installations on walls and floors.
Will the system correct an uneven surface?
The system helps align adjoining tiles, but it cannot correct an unsuitable, unstable or severely uneven substrate. Prepare and level the background before tiling.
Can the wedges be reused?
Yes. The wedges can normally be collected and reused, provided they remain clean and undamaged.